Deployment Guide

29 Dell EMC Networking FCoE Deployment with S4148U-ON in NPG Mode
4. A list of discovered ESXi hosts is displayed. Select the applicable hosts and click Next.
5. A VMware API for Storage Awareness (VASA) Provider is not used in this example. Click Next.
6. On the Summary page, review the ESXi Hosts to be added. Click Finish.
7. When the Overall status shows 100% Completed, click Close.
8. The vCenter server is displayed as shown in Figure 13.
vCenter server added to Unisphere
9. The list of added ESXi hosts is displayed on the ESXi Hosts tab, as shown in Figure 14.
ESXi Hosts added to Unisphere
Note: Additional hosts may be added as needed on the ESXi Hosts tab. Click the icon, enter the
credentials for the vCenter Server or ESXi host, and follow the prompts.
B.2.3 Create LUNs and configure host access
1. In the Unisphere left pane under STORAGE, select Block.
2. On the LUNs tab, click the icon to open the Create LUNs dialog box.
3. On the Configure LUN(s) page, select the Number of LUNs. Provide a Name and select the
Storage Pool. Modify the Size as required and click Next.
4. On the Access page, click the icon and select host(s) to be granted access to the LUN. Click OK
> Next.
5. On the Snapshot page, leave settings at their defaults and click Next.
6. On the Replication page, leave settings at their defaults and click Next.
7. On the Summary page, review the details and click Finish to create the LUN.
8. On the Results page, click Close when Overall status shows 100% Completed.
The newly created LUN is now visible on the LUNs tab as shown in Figure 15. In this example, a LUN named
FC-80GB that is 80GB in size has been created.