Deployment Guide

23 Dell EMC Networking FCoE Deployment with S4148U-ON in NPG Mode
6.5 show vfabric
The show vfabric command output provides a variety of information including the default zone mode, the
active zone set, and interfaces that are members of the vfabric.
S4148U-Leaf1# show vfabric
Fabric Name
Fabric Type NPG
Fabric Id 101
Vlan Id 1001
FC-MAP 0xEFC64
Vlan priority 3
FCF Priority 128
FKA-Adv-Period Enabled,8
Config-State ACTIVE
Oper-State UP
==========================================
Members
fibrechannel1/1/1
fibrechannel1/1/3
ethernet1/1/31
ethernet1/1/32
ethernet1/1/33
ethernet1/1/34
==========================================