Deployment Guide

18 Dell EMC Networking Fibre Channel Deployment with S4148U-ON in F_port Mode | version 1.0
Proceed to reboot the system? [confirm yes/no]:y
5.2 Configure switches
After the switch port profile is set on both S4148U-ONs, the commands in the tables that follow are run to
complete the FC configuration on both switches. The port numbers used correspond to the topology diagram
shown in Figure 7.
Note: The commands in the tables below should be entered in the order shown. Switch running-
configuration files are provided as attachments named S4148U-Leaf1.txt and S4148U-Leaf2.txt.
Configure the hostname, OOB management IP address, and OOB management default gateway.
S4148U-Leaf1
S4148U-Leaf2
configure terminal
hostname S4148U-Leaf1
interface mgmt 1/1/1
no ip address dhcp
ip address 100.67.169.31/24
no shutdown
management route 0.0.0.0/0
100.67.169.254
configure terminal
hostname S4148U-Leaf2
interface mgmt 1/1/1
no ip address dhcp
ip address 100.67.169.30/24
no shutdown
management route 0.0.0.0/0
100.67.169.254
The feature fc domain-id domain-id command puts the switch in F_port mode. FC aliases are
configured for the server and storage adapter WWPNs from Table 1 and Table 2. Using aliases is optional,
but makes the configuration more user-friendly.
S4148U-Leaf1
S4148U-Leaf2
feature fc domain-id 100
fc alias r640-1p1
member wwn 20:01:00:0E:1E:09:A2:3A
fc alias r640-2p1
member wwn 20:01:00:0E:1E:09:B8:F6
fc alias SpB-0
member wwn 50:06:01:6E:47:E0:1B:19
fc alias SpA-0
member wwn 50:06:01:66:47:E0:1B:19
feature fc domain-id 100
fc alias r640-1p2
member wwn 20:01:00:0E:1E:09:A2:3B
fc alias r640-2p2
member wwn 20:01:00:0E:1E:09:B8:F7
fc alias SpB-1
member wwn 50:06:01:6F:47:E0:1B:19
fc alias SpA-1
member wwn 50:06:01:67:47:E0:1B:19