Setup Guide

Storing components
If you do not install your S4100–ON Series swtich and components immediately, Dell recommends properly storing the switch and all
optional components following these guidelines:
• Storage location temperature must remain constant. The storage range is from -40° to 149°F (-40° to 65°C).
• Store on a dry surface or oor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
NOTE: ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the S4100–ON Series switch and its accessories. After you remove the original packaging, place the S4100–ON
Series switch and its components on an anti-static surface.
8 Site preparations