Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4128F-ON/S4128T-ON
51525354555657585960
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show inventory
Product : S6000-ON
Description : S6000-ON 32x40GbE QSFP+ Interface Module
Software version : 10.2.9999E
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------
* 1 S6000-ON 07VJDK A02 CN-07VJDK-28298-52R-0032 5XYK0Z1 129 373 368 13
1 S6000-ON-PWR-1-AC 0T9FNW A00 CN-0T9FNW-28298-52R-0263 AEIOU## 226 457 410 55
1 S6000-ON-FANTRAY-1 0MGDH8 A00 CN-0MGDH8-28298-52R-0394 AEIOU## 226 457 410 55
1 S6000-ON-FANTRAY-2 0MGDH8 A00 CN-0MGDH8-28298-52R-0394 AEIOU## 226 457 410 55
1 S6000-ON-FANTRAY-3 0MGDH8 A00 CN-0MGDH8-28298-52R-0392 AEIOU## 226 457 410 55
Supported Releases 10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the management port.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
• all — (Optional) Display the IPv4 routes that the management interface uses.
• connected — (Optional) Display only routes directly connected to a management interface.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv4 static routes congured for the management port. Use the management
route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported Releases 10.2.2E or later
show ipv6 management-route
Displays the IPv6 routes used to access the management port.
Syntax
show ipv6 management-route [all | connected | summary | static]
Parameters
• all — (Optional) Display the IPv6 routes that the management interface uses.
• connected — (Optional) Display only routes directly connected to the management interface.
Getting Started 55