Reference Guide

spanning-tree mst conguration
Enters MST mode to congure MSTP from Conguration mode.
Syntax
spanning-tree mst configuration
Parameters None
Default Disabled
Command Mode CONFIGURATION
Usage Information Use this command to enter STP MST conguration mode.
Example
OS10(config)# spanning-tree mst configuration
OS10(conf-mst)#
Supported Releases 10.2.0E or later
revision
Congures a revision number for the MSTP conguration.
Syntax
revision number
Parameters number — Enter a revision number for the MSTP conguration (0 to 65535).
Default 0
Command Mode MULTIPLE-SPANNING-TREE
Usage Information To have a bridge in the same MST region as another, the default values for the revision number must match on all
Dell hardware devices. If there are non-Dell devices, ensure the revision number value matches on all the devices
(see Non-Dell Hardware).
Example
OS10(conf-mst)# revision 10
Supported Releases 10.2.0E or later
show spanning-tree mst
Displays MST conguration information.
Syntax
show spanning-tree mst configuration
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Enable MSTl prior to using this command.
Example
OS10# show spanning-tree mst configuration
Region Name: asia
Revision: 0
MSTI VID
0 1,7-4093
1 2
2 3
Layer 2 179