Reference Guide
peer switches to avoid any unpredictable behavior. For example, unit down or VLTi reset. The no version of this
command disables the VLT MAC address conguration.
NOTE: Congure the VLT MAC address as symmetrical in all the VLT peer switches to avoid any
unpredictable behavior when any unit is down or when VLTi is reset.
Example
OS10(conf-vlt-1)# vlt-mac 00:00:00:00:00:02
Supported Releases 10.2.0E or later
vrrp mode active-active
Enables the VRRP peers to locally forward L3 trac in a VLAN interface.
Syntax
vrrp mode active-active
Parameters None
Default Enabled
Command Mode VLAN INTERFACE
Usage Information The no version of this command disables the conguration. This command is applicable only for VLAN interfaces.
Example
OS10(conf-if-vl-10)# vrrp mode active-active
Supported Releases 10.2.0E or later
740 Virtual Link Trunking