Users Guide

show vfabric
Shows the fc timer, E_D_TOV, R_A_TOV, principal switch priority, and domain ID values in the show vfabric command.
Syntax
show vfabric value
Parameters
value—Valid values are from 1 to 255.
Defaults Not applicable
Command Mode GLOBAL CONFIGURATION
Usage
Information
Use this command to display the fc timers, E_D_TOVand R_A_TOV, principal switch priority and domain
ID values. Also, this command shows the configured domain ID, run-time domain ID, and the principal
switch priority of the switch.
Example
OS10# show vfabric
Fabric Name SAN_FABRIC
Fabric Type Multi-Switch
Fabric Id 10
VlanId 1002
FC-MAP 0xEFC00
FCF Priority 128
FKA-Adv-Period Enabled, 8
Config-State ACTIVE
Oper-State UP
=================================================
Switch Config Parameters
==================================================
Domain ID 3
Switch Priority 3
E-D-TOV(ms) 1000
R-A-TOV(ms) 5000
==================================================
Switch Fabric Parameters
==================================================
Run Time Domain ID 4
Run Time Switch Priority 3
==================================================
Switch Zoning Parameters
=================================================
Default Zone Mode: Deny
Active ZoneSet: zoneset5
==========================================
Members
fibrechannel1/1/11
fibrechannel1/1/17
fibrechannel1/1/22
Supported
Releases
10.5.1.0 or later
show vfabric fspf
Displays FSPF information at the vfabric level.
Syntax
show vfabric fspf
Parameters None
Defaults Not applicable
Command Mode GLOBAL CONFIGURATION
Usage
Information
Use this command to display the FSPF information of an interface.
Fibre Channel 461