Specifications

Table 1. SmartFusion FPGA registers
Oset Name Description
0x200 SMF_VER SmartFusion FPGA version register
Figure 13. Get current FPGA version
4 Upgrade the FPGA in smartFusion using the # ./smarttool -uf /dev/ttyS0 <path_to_the_image>/
<platform>_SMF_logic_v0.E.dat command. To upgrade to region A, you must be in region G. The device automatically
reboots after the upgrade.
Figure 14. Upgrade FPGA
5 Verify that the FPGA is upgraded using the lpctool utility. Get the FPGA running image version through the ./lpctool --read
--addr=0x200 --size=b
registers of the LPC tool.
smbiostool
The smbiostool displays information about the BIOS and also reprograms the BIOS ash.
NOTE
: The smbiostool is not available for all platforms. For some platforms, this tool is replaced with the updatetool.
CLI options
DellEmc Diag - SMBIOS Tool
version 1.2, x.xx.x.x-x
build, 2017/05/23,
Usage:=
78
Dell EMC DAIG-OS tools