Specifications

Figure 10. Check MSS upgrade
Upgrading SMF FPGA
To upgrade your system using the FPGA method, follow these steps.
1 Copy all the binaries needed for upgrade into a local directory.
Figure 11. Copy needed binaries
2 Check the FPGA region using smarttool –gfr /dev/ttyS0 command.
Figure 12. Check FPGA region
3 Get the current version of the FPGA using the lpctool utility. Get the FPGA running image version through the ./lpctool --
read --addr=0x200 --size=b registers at the LPC tool.
Dell EMC DAIG-OS tools
77