Concept Guide

Usage
Information
This command is supported in both Full Switch and SmartFabric modes.
Example
MX5108N-B1# show smartfabric discovered-server
----------------------------------------------------------
Server-Tag : 004YX20
Server-Model : PowerEdge MX740c
Server-Slot : 1
Chassis-Model : POWEREDGE MX7000
Chassis-Service-Tag : SKY002R
----------------------------------------------------------
----------------------------------------------------------
Server-Tag : 0002X20
Server-Model : PowerEdge MX740c
Server-Slot : 1
Chassis-Model : POWEREDGE MX7000
Chassis-Service-Tag : SKY0044
----------------------------------------------------------
Supported
Releases
10.5.1.0 or later
show smartfabric discovered-server discovered-
server-interface
Displays interface-level information of all the discovered servers. Information includes port ID and switch interfaces on which
the server is onboarded.
Syntax
show smartfabric discovered-server discovered-server-interface server-id
Parameters server-id—Enter a discovered server ID information.
Default None
Command Mode EXEC
Usage
Information
This command is supported in both Full Switch and SmartFabric modes.
Example
MX9116N-B1# show smartfabric discovered-server discovered-server-
interface 00FWX
20
Nic-Id : Switch-Interface
------------------------------------------------------
NIC.Mezzanine.1A-1-1 3GB1XC2:ethernet1/1/1
NIC.Mezzanine.1A-2-1 9A2HEM3:ethernet1/1/1
Supported
Releases
10.5.1.0 or later
show smartfabric networks
Displays detailed description of the configured network profiles. Description includes network name, type, network ID, QoS
priority type, and VLAN.
Syntax
show smartfabric networks
Parameters None
Default None
Command Mode EXEC
SFS commands 49