Concept Guide

To delete an uplink:
1. Select an uplink from the list and click Delete.
2. Click Ok to confirm deletion.
NOTE: When you delete an uplink, the network and route profile that are associated with the uplink are not deleted.
Breakout switch ports
You can configure breakouts for the Ethernet ports or port-group only on the leaf switches to connect to the external device or
jump host. Use the following procedure to breakout switch ports:
1. Click Home > Breakout Switch Ports.
2. Select the rack from the list.
3. Select the leaf switch in the rack.
4. Select a port-group or a physical Ethernet port of the leaf switch to breakout.
5. Select the appropriate breakout option from the list and click Ok.
26
Deploying and managing a fabric