Reference Guide

Standby Build Date/Time: 2018-07-19T13:37:20Z
Next-Boot: active[A]
View boot summary
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot [A] 10.4.1.0X [B] 10.4.1.0X [A] active
Upgrade commands
boot system
Sets the boot partition to use during the next reboot.
Syntax
boot system {active | standby}
Parameters
• active — Reset the running partition as the next boot partition.
• standby — Set the standby partition as the next boot partition.
Default Active
Command Mode EXEC
Usage Information Use this command to congure the location of the OS10 image used to reload the software at boot time. Use the
show boot command to view the congured next boot image. This command is applied immediately and does not
require the commit command.
Example
OS10# boot system standby
Supported Releases 10.2.0E or later
image cancel
Cancels an active image download.
Syntax
image cancel
Parameters None
Default Not congured
Command Mode EXEC
Usage Information This command attempts to cancel an active le download in progress.
Example
OS10# image cancel
Supported Releases 10.2.0E or later
System management 555