Reference Guide

3 Install the license le from the workstation in EXEC mode.
license install {ftp: | http: | localfs: | scp: | sftp: | tftp: | usb:} filepath/filename
• ftp://userid:passwd@hostip/filepath — Copy from a remote FTP server
• http://hostip/filepath — Copy from a remote HTTP server
• http://hostip — Send request to a remote HTTP server.
• localfs://filepath — Install from a local le directory.
• scp://userid:passwd@hostip/filepath — Copy from a remote SCP server.
• sftp://userid:passwd@hostip/filepath — Copy from a remote SFTP server.
• tftp://hostip/filepath — Copy from a remote TFTP server.
• usb://filepath — Install from a le directory on a storage device connected to the USB storage port on the switch.
• filepath/filename — Enter the directory path where the license le is stored.
Install license
OS10# license install scp://user:userpwd@10.1.1.10/CFNNX42-NOSEnterprise-License.xml
License installation success.
Verify license installation
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name :
Product Name : S4000ON
Hardware Version: X01
Platform Name :
PPID : TW0J09D32829849Q0164
Service Tag : BJD7VS1
License Details
----------------
Software : OS10-Enterprise
Version : 10.4.1.0X
License Type : PERPETUAL
License Duration: Unlimited
License Status : Active
License location: /mnt/license/BJD7VS1.lic
---------------------------------------------------------
Troubleshoot license installation failure
An error message displays if the installation fails.
License installation failed
1 Verify the installation path to the local or remote location you tried to download the license from.
2 Check the log on the remote server to see why the FTP or TFTP le transfer failed.
3 Ping the remote server from the switch — use the ping and traceroute commands to test network connectivity. Check the
following if ping fails:
• If the remote server is reachable through the management route, check if the management route is congured correctly.
• If the remote server is reachable through a front-panel port, check if the static or dynamic route is present.
4 Install the server with the license le on the same subnet as the switch.
5 Check if the server is up and running.
Zero-touch deployment
Zero-touch deployment (ZTD) allows OS10 users to automate switch deployment:
28
Getting Started