Reference Guide

Command Mode MONITOR-SESSION
Usage Information None
Example
OS10(config)# monitor session 1
OS10(conf-mon-local-1)# source interface ethernet 1/1/7 rx
OS10(config)# monitor session 5 type rpm-source
OS10(conf-mon-rpm-source-5)# source interface ethernet 1/1/10 rx
OS10(config)# monitor session 10 type erpm-source
OS10(conf-mon-erpm-source-10)# source interface ethernet 1/1/5 rx
Supported Releases 10.2.0E or later
source-ip
Congures the source, destination, and protocol type of the monitored port for an ERPM monitoring session.
Syntax
source-ip source ip-address destination-ip destination ip-address [gre-protocol
protocol-value]
Parameters
• source ip-address — Enter the source IP address.
• destination ip-address — Enter the destination IP address.
• protocol-value — Enter the GRE protocol value (1 to 65535, default: 35006).
Default Not congured
Command Mode MONITOR-SESSION
Usage Information None
Example
OS10(config)# monitor session 10
OS10(conf-mon-erpm-source-10)# source-ip 10.16.132.181 destination-ip
172.16.10.11 gre-protocol 35006
Supported Releases 10.4.0E(R1) or later
266 Layer 2