Reference Guide

Example
OS10(config)# spanning-tree vlan 10 hello-time 5
Supported Releases 10.2.0E or later
spanning-tree vlan mac-ush-threshold
Sets the threshold value to ush MAC addresses on specied VLAN.
Syntax
spanning-tree vlan vlan-id mac-flush-threshold threshold-value
Parameters
• vlan-id — Enter the VLAN ID number, ranging from 1 to 4093.
• threshold-value—Enter the threshold value for the number of ushes, ranging from 0 to 65535. The
default value is 0.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the threshold value.
Example
OS10(config)# spanning-tree vlan 100 mac-flush-threshold 255
Supported Releases 10.4.0E(R1) or later
spanning-tree vlan max-age
Congures the time period the bridge maintains conguration information before refreshing the information by recomputing RPVST.
Syntax
spanning-tree vlan vlan-id max-age seconds
Parameters max-age seconds — Enter a maximum age value in seconds (6 to 40).
Default 20 seconds
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# spanning-tree vlan 10 max-age 10
Supported Releases 10.2.0E or later
spanning-tree vlan priority
Sets the priority value for RPVST+.
Syntax
spanning-tree vlan vlan-id priority priority value
Parameters priority priority value — Enter a bridge-priority value in increments of 4096 (0 to 61440). Valid priority
values are: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344,
and 61440. All other values are rejected.
Default Not congured
Command Mode CONFIGURATION
Layer 2 235