Dell PowerSwitch S4112F-ON/S4112T-ON : Users Guide : Page 642

Create or remove VLANs

You can create VLANs and add physical interfaces or port-channel LAG interfaces to the VLAN as tagged or untagged

members. You can add an Ethernet interface as a trunk port or as an access port, but it cannot be added as both

simultaneously.

Multiple non-default vlans with physical and port channel ports in Access and Trunk modes

OS10# show vlan

Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,

@ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated

Q: A - Access (Untagged), T - Tagged

NUM Status Description Q Ports

* 1 Active A Eth1/1/1,1/1/4-1/1/21,1/1/24

A Po20,41-48,101

A Po40

200 Active T Eth1/1/3:2

T Po40

A Eth1/1/31

320 Active T Eth1/1/25:4 1/1/32

T Po40

A Eth1/1/3:1 49 1/1/50 1/1/51 1/1/52

The shutdown command stops L3–routed traffic only. L2 traffic continues to pass through the VLAN. If the VLAN is not a

routed VLAN configured with an IP address, the shutdown command has no effect on VLAN traffic.

When you delete a VLAN using the no interface vlan vlan-id command, any interfaces that are assigned to that VLAN

are assigned to the default VLAN as untagged interfaces.

To configure a port-based VLAN, enter INTERFACE-VLAN mode for VLAN-related configuration tasks and create a VLAN. To

enable the VLAN, assign member interfaces in L2 mode.

1. Create a VLAN or a range of VLANs in CONFIGURATION mode. Enter the VLAN ID numbers from 1 to 4093.

interface vlan vlan-id

interface range vlan vlanID-vlanID,[...]

2. Delete a VLAN or a range of VLANs in CONFIGURATION mode.

no interface vlan vlan-id

no interface range vlan vlanID-vlanID,[...]

Create VLAN

OS10(config)# interface vlan 108

Create a range of VLANs

OS10(config)# interface range vlan 2-10

Delete VLAN

OS10(config)# no interface vlan 108

Delete a range of VLANs

OS10(config)# no interface range vlan 2-10

View configured VLANs

OS10# show interface vlan

Vlan 1 is up, line protocol is up

Address is 00:00:00:00:00:c9, Current address is 00:00:00:00:10:c9

Interface index is 69208865

642

Layer 2