Users Guide

Table 45. High-level configurations on FSB1, FSB3, and FCF1
FSB1/FSB2 FSB3/FSB4 FCF1/FCF2
Configure the uplink interface as
pinned-port.
12. Configure FIP snooping port mode on
the uplink interface.
the downlink interface as pinned-
port.
12. Configure FIP snooping port mode on
the uplink interface and the port
channel.
FSB1 configuration
1. Enable FIP snooping.
FSB1(config)# feature fip-snooping with-cvl
2. Enable DCBX.
FSB1(config)# dcbx enable
3. Create FCoE VLAN and configure FIP snooping.
FSB1(config)#interface vlan1001
FSB1(conf-if-vl-1001)# fip-snooping enable
FSB1(conf-if-vl-1001)# no shutdown
FSB1(config)#interface vlan1002
FSB1(conf-if-vl-1002)# fip-snooping enable
FSB1(conf-if-vl-1002)# no shutdown
4. Create class-maps.
FSB1(config)# class-map type network-qos c3
FSB1(config-cmap-nqos)# match qos-group 3
FSB1(config)# class-map type queuing q0
FSB1(config-cmap-queuing)# match queue 0
FSB1(config-cmap-queuing)# exit
FSB1(config)# class-map type queuing q3
FSB1(config-cmap-queuing)# match queue 3
FSB1(config-cmap-queuing)# exit
5. Create policy-maps.
FSB1(config)# policy-map type network-qos nqpolicy
FSB1(config-pmap-network-qos)# class c3
FSB1(config-pmap-c-nqos)# pause
FSB1(config-pmap-c-nqos)# pfc-cos 3
FSB1(config)# policy-map type queuing ets_policy
FSB1(config-pmap-queuing)# class q0
FSB1(config-pmap-c-que)# bandwidth percent 30
FSB1(config-pmap-c-que)# class q3
FSB1(config-pmap-c-que)# bandwidth percent 70
6. Create a qos-map.
FSB1(config)# qos-map traffic-class tc-q-map1
FSB1(config-qos-map)# queue 3 qos-group 3
FSB1(config-qos-map)# queue 0 qos-group 0-2,4-7
7. Configure port channel.
FSB1(config)# interface port-channel 10
FSB1(conf-if-po-10)# no shutdown
FSB1(conf-if-po-10)# vlt-port-channel 1
Fibre Channel
471