Connectivity Guide

Example
OS10# show lldp interface ethernet 1/1/5
ethernet1/1/5
Tx State : Enabled
Rx State : Enabled
Tx SEM State : initialize
Rx SEM State : wait-port-operational
Notification Status : Disabled
Notification Type : mis-configuration
DestinationMacAddr : 01:80:c2:00:00:0e
Example (Local
Device)
OS10# show lldp interface ethernet 1/1/1 local-device
Device ID: 00:0c:29:e5:aa:f4
Port ID: ethernet1/1/1
System Name: OS10
Capabilities: Bridge Router
System description: Dell networking Operating system
Port description: Connected to end point device
Time To Live: 120
LLDP MED Capabilities: Capabilities, Network Policy
LLDP MED Device Type: Network connectivity
Example (MED)
OS10# show lldp interface ethernet 1/1/20:1 med
Port |Capabilities|Network Policy|Location|Inventory|POE
----------------|------------|--------------|--------|---------|---
ethernet1/1/20:1| Yes| Yes| No| No| No
Network Polices :
Supported Releases 10.2.0E or later
show lldp errors
Displays the LLDP errors related to memory allocation failures, queue overows, and table overows.
Syntax
show lldp errors
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp errors
Total Memory Allocation Failures: 0
Total Input Queue Overflows: 0
Total Table Overflows: 0
Supported Release 10.2.0E or later
show lldp med
Displays the LLDP MED information for all the interfaces.
Syntax
show lldp med
Parameters None
Default Not congured
Command Mode EXEC
308 Layer 2