Setup Guide

INTERFACE mode
no shutdown
Management route conguration
Dene a path from the S4048T–ON to the network from which you are accessing the
S4048T–ON remotely.
Management routes are separate from IP routes and are used to manage the S4048T–ON
through the management port.
• Congure a management route to the network from which you are accessing the
system.
CONFIGURATION mode
management route ip-address/mask gateway
Username and password conguration
To access the system remotely, congure a system username and password.
• To access the system remotely, congure a username and password.
CONFIGURATION mode
username username password [encryption-type]
Enable password conguration
Access EXEC Privilege mode using the enable command. EXEC Privilege mode is
unrestricted by default. As a basic security measure, congure a password.
There are two types of enable passwords:
• Enable password—stores the password in the running/startup conguration using a data
encryption standard (DES)-encryption method.
• Enable secret—stores the password in the running/startup conguration using a
stronger, MD5-encryption method.
Dell Networking recommends using the enable secret password.
30
Software conguration