Setup Guide

Software conguration
NOTE: This section applies ONLY if you already have Dell Networking OS 9.x
installed on your system from the factory. If you are installing a third-party OS, see
your third-party OS documentation.
NOTE: For further information on the S4048T-ON system, see the documents listed
in About this guide.
Topics:
Initial conguration information
Navigating CLI modes
Console access
RJ-45 console port access
Default conguration
Layer 2 data link conguration
Host name conguration
Remote access
Enable password conguration
Port-based VLAN creation
System connection
Initial conguration information
To set up the switch, assign an IP address and other conguration information necessary for
the switch to communicate with the local routers and the Internet. The minimal conguration
provided here does not cover most of the features. This information simply allows you to
perform other conguration tasks using a Telnet connection from your management
network.
4
Software conguration 25