Install Guide

Figure 13. Four-post threaded conguration

1U two-post installation

You can install the switch in 1U front-rack, four-post or two-post congurations. The following is an example of a front-rack conguration.

For the 1U two-post ush or center congurations, slide the system into the rails in the same manner as the four-post congurations.

1U front-rack installation

Congure the rails that are attached to the system:

1 Attach the inner chassis members switch rails to the system, items 1 and 2.

The following illustration, item 3, shows the detail for the front stando with the locking tab.

S4048T-ON installation