Install Guide
Figure 12. Two-post center-mount conguration
Four-post threaded conguration
CAUTION
: To be NEBS Earthquake Z4-compliant, you must remove the tool-less latch castings described in Step 1.
1 Remove the tool-less latch castings from each end of the ReadyRails assemblies.
Use a Torx driver to remove the two screws from each latch casting. Remove each casting, item 1. Retain the castings for future rack
requirements.
2 Attach the front and rear anges for each rail to the post anges with two user-supplied screws at each end, item 2.
S4048T-ON installation
23