Administrator Guide

debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
Syntax
debug fip-snooping rx packet-type [all | discovery | ns | virtual-link-
instantiation | virtual-link-maintenance| vlan-discovery] [interface]
Parameters
packet-type Enter the keyword packet-type and then the option type on which to enable
debugging. The options are:
• all — Enter the keyword all to enable debugging on all the options.
• discovery — Enter the keyword discovery to enable debugging on FCF
advertisements and ENode solicitation.
•
ns — Enter the keyword ns to enable debugging of the name-server packets.
• virtual-link-instantiation — Enter the keywords virtual-link-
instantiation to enable debugging on FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords virtual-link-
maintenance to enable debugging on FIP clear virtual link frames and keepalives.
• vlan-discovery — Enter the keywords vlan-discovery to enable debugging
on VLAN requests and notifications.
interface Enter the following keywords and slot/port[/subport] or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a port channel interface, enter the keywords port-channel then a number.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
9.2(0.2) Introduced on the S4810 and S4820T. Added the receive parameters packet-type and
interfaces and their options.
feature fip-snooping
Enable FCoE transit and FIP snooping on a switch.
Syntax
feature fip-snooping
To disable the FCoE transit feature, use the no feature fip-snooping command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
FIP Snooping 599