Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance — Enable VXLAN instance configuration on the platform.
debug vxlan
Debug messages between the Gateway and Controller.
Syntax
debug vxlan
Defaults Disabled
Command Modes EXEC Privilege
Command History
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
disable-mac-learn
Disable MAC address learning on the network port of a static VXLAN tunnel.
Syntax
disable-mac-learn remote-vtep-ip
To return to the default state of enabled, use the no disable-mac-learn command.
Parameters
remote-vtep-ip Enter the IP address of the remote VTEP that connects to the VXLAN tunnel on which
MAC learning should be disabled.
NOTE: The remote VTEP should already be configured.
Defaults Enabled
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command-Line Reference Guide.
Version Description
9.14(2.3) Introduced on the S4048–ON, S4048T-ON, S6000, S6010-ON, S6100-ON, and Z9100–
ON.
Usage Information
Use the disable-mac-learn command in the VXLAN-INSTANCE mode.
Virtual Extensible LAN (VXLAN) 1657