Administrator Guide

clear mac-address-table dynamic
Clear the MAC address table of specific or all MAC address learned dynamically.
Syntax
clear mac-address-table dynamic {vxlan {interface interface-type | remote-vtep-
ip ip-address | vnid vnid} | all | interface | vlan | vxlan}
Parameters
interface
interface-type
Enter the keyword interface and the interface type to clear all MAC addresses learnt
on that interface. The same is also notified to the controller.
remote-vtep-ip ip-
address
Enter the keyword remote-vtep-ip and the IP address of the remote VTEP to clear
all MAC addresses learnt from that VTEP.
vnid vnid Enter the keyword vnid and the VNID of to clear all MAC addresses learnt from all
access interfaces that belong the VNID.
all Enter the keyword all to clear both MAC address of the VXLAN and legacy VLAN.
interface Enter the keyword interface to clear MAC address from a specific interface.
vlan Enter the keyword vlan to clear MAC address from a specific vlan.
vxlan Enter the keyword vxlan to clear MAC address from a specific vxlan.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
controller
Configures controller for the VXLAN instance on the platform.
Syntax
controller controller ID ip address port port-number tcp|ssl
Parameters
controller ID Enter the controller ID.
ip address Enter the IP address of the controller.
port port-number (OPTIONAL) Enter the keyword port and the port number.
The range is from 1 to 6632. The default port number is 6632.
tcp (OPTIONAL) Enter the keyword tcp to configure tcp connection to controller.
ssl (OPTIONAL) Enter the keyword ssl to configure ssl connection to controller (Default).
Defaults Disabled
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
1656 Virtual Extensible LAN (VXLAN)