Administrator Guide
Table Of Contents
- Open Networking Hardware Diagnostic Guide April 2016
- About this Guide
- Installation Instructions for ONIE and the Dell OS
- ONIE Overview
- Dell DIAG OS
- Dell DiagOS Tools
- Technical Support
Fan 2 speed is 3581 RPM
Getting Details for Fan 3
Fan 3 is Present
Fan 3 Air flow type is Front To Rear
Fan 3 status Normal
Fan 3 speed is 3577 RPM
Getting Details for Fan 4
Fan 4 is Present
Fan 4 Air flow type is Front To Rear
Fan 4 status Normal
Fan 4 speed is 3526 RPM
Fan Controller Test LPC.................... Passed
Fan Controller Test LPC....................
Max number of Fan Trays in the System : 4
Number of fans per tray : 1
Max Fan Speed set(PWM): 255
Getting Details for Fan 1
Fan 1 is Present
Fan 1 Air flow type is Front To Rear
Fan 1 status Normal
Fan 1 speed is 3558 RPM
Getting Details for Fan 2
Fan 2 is Present
Fan 2 Air flow type is Front To Rear
Fan 2 status Normal
Fan 2 speed is 3581 RPM
Getting Details for Fan 3
Fan 3 is Present
Fan 3 Air flow type is Front To Rear
Fan 3 status Normal
Fan 3 speed is 3577 RPM
Getting Details for Fan 4
Fan 4 is Present
Fan 4 Air flow type is Front To Rear
Fan 4 status Normal
Fan 4 speed is 3526 RPM
Fan Controller Test LPC....................... Passed
Fan 1 speed is 3558 RPM
Fan 2 speed is 3581 RPM
Fan 3 speed is 3577 RPM
Fan 4 speed is 3529 RPM
optional module index :1
Slot:0, opt slot :0, Type:2
optional module index :2
Slot:1, opt slot :1, Type:2
optional module index :3
Slot:2, opt slot :2, Type:2
optional module index :4
Slot:3, opt slot :3, Type:2
Testing Temp sensor devices:
No. of sensors in the system :10
Temperature Sensor 1 temperature value is 31.2 C and temperature is normal
....................... Passed
Temperature Sensor 2 temperature value is 32.7 C and temperature is normal
....................... Passed
Temperature Sensor 3 temperature value is 29.3 C and temperature is normal
....................... Passed
Temperature Sensor 4 temperature value is 28.2 C and temperature is lower than HW lower
threshold
....................... FAILED <<<---
Temperature Sensor 5 temperature value is 28.7 C and temperature is normal
....................... Passed
Temperature Sensor 6 temperature value is 29.2 C and temperature is normal
....................... Passed
Temperature Sensor 7 temperature value is 29.3 C and temperature is normal
....................... Passed
Temperature Sensor 8 temperature value is 30.2 C and temperature is normal
....................... Passed
Temperature Sensor 9 temperature value is 27.7 C and temperature is normal
....................... Passed
Temperature Sensor 10 temperature value is 20.1 C and temperature is normal
Dell DiagOS Tools 87