Administrator Guide

vmetool
The CPLDupgradetool uses vmetool to upgrade CPLD.
CLI Options
root@dell-diag-os:/opt/dell/diag/bin# vmetool
Lattice Semiconductor Corp.
ispVME(tm) V12.2 Copyright 1998-2011.
Outputs
The following shows daisy chain programming of all in-system programmable devices.
Usage: vme [option] vme_file [vme_file]
Example: vme vme_file1.vme vme_file2.vme
Example: vme -c | -cl | -ch
Example: where sel_pin will be LOW for -cl option and HIGH for -ch
Example: vme -c | -cl | -ch vme_file1.vme vme_file2.vme
root@dell-diag-os:/opt/dell/diag/bin#
edatool
The edatool is included in the diagnostic tools. Use the tool to test the basic functionality of the system.
The edatool executes a script of simple commands, similar to commands in the CLI. In most cases, these tests are run by the
diagnostics tools. The success or failure of these tools is reported, and at the end of the edatool run, reports the PASSED or
FAILED results in a standard format easily parsed by test scripts.
Tests
The edatool does not have a test command, but instead runs all the tests that are scripted.
CLI Options
Dell Diag - Extended Diagnostics Application
version 1.4, 1.10
build, 2015/07/13,
Syntax: edatool <option>
--h := show this help
--list := lists tests in config files
--config=<config file> := Config file to use for tests
--extended-config=<config file> : Config file to use for extended tests
Output
root@dell-diag-os:~# edatool
*****************************
* Diagnostics Application *
*****************************
Dell Diag edatool version 1.4, package 1.10 2016/01/04
Dell DiagOS Tools 83