Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON

Table Of Contents

POST PCI test ............................... PASS

POST NVRAM check ............................ PASS

POST overall test results ................... PASS

NVRAM: 00 9F 00 E6 0B 01 00 EA

BIOS Date: 08/28/2015 16:17:45 Ver: 0ACBZ028

Press <DEL> or <F2> to enter setup.

Booting `EDA-DIAG'

Loading DIAG-OS ...

[ 1.238906] dummy-irq: no IRQ given. Use irq=N

[ 11.398168] esas2r: driver will not be loaded because no ATTO esas2r devices were found

[ 11.426895] mtdoops: mtd device (mtddev=name/number) must be supplied

[ 12.441271] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid

passed, refusing all cards

[ 12.452859] intel_rapl: driver does not support CPU family 6 model 77

[FAILED] Failed to start Create Volatile Files and Directories.

See 'systemctl status systemd-tmpfiles-setup.service' for details.

[ OK ] Started Copy rules generated while the root was ro.

Starting Update UTMP about System Boot/Shutdown...

[ OK ] Started Trigger Flushing of Journal to Persistent Storage.

[ OK ] Started Update UTMP about System Boot/Shutdown.

[ OK ] Found device /dev/ttyS1.

[ OK ] Started LSB: Raise network interfaces..

[ OK ] Reached target Network.

[ OK ] Reached target System Initialization.

[ OK ] Reached target Timers.

[ OK ] Reached target Basic System.

Starting OpenBSD Secure Shell server...

[ OK ] Started OpenBSD Secure Shell server.

Starting Regular background program processing daemon...

[ OK ] Started Regular background program processing daemon.

Starting /etc/rc.local Compatibility...

Starting getty on tty2-tty6 if dbus and logind are not available...

Starting System Logging Service...

Starting Permit User Sessions...

[ OK ] Started /etc/rc.local Compatibility.

[ OK ] Started Permit User Sessions.

[ OK ] Started System Logging Service.

Starting Getty on tty2...

[ OK ] Started Getty on tty2.

Starting Getty on tty1...

[ OK ] Started Getty on tty1.

Starting Serial Getty on ttyS1...

[ OK ] Started Serial Getty on ttyS1.

Starting Getty on tty3...

[ OK ] Started Getty on tty3.

Starting Getty on tty4...

[ OK ] Started Getty on tty4.

Starting Getty on tty5...

[ OK ] Started Getty on tty5.

Starting Getty on tty6...

[ OK ] Started Getty on tty6.

[ OK ] Started getty on tty2-tty6 if dbus and logind are not available.

[ OK ] Reached target Login Prompts.

[ OK ] Reached target Multi-User System.

Dell DIAG OS 25