Administrator Guide

L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric
Last Change
----------- ------- -----------
-----------
S 1.1.1.0/24 4.4.4.2, via Te 1/4 , weight 100 1/0 00:00:01
6.6.6.2, via Te 1/16, weight 200
C 4.4.4.0/24 Direct, Te 1/4 0/0 00:01:32
C 6.6.6.0/24 Direct, Te 1/16 0/0 00:01:25
DellEMC# show ip route 1.1.1.0/24
Routing entry for 1.1.1.0/24
Known via "static", distance 1, metric 0
Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via TenGigabitEthernet 1/4 weight 100
* 6.6.6.2, via TenGigabitEthernet 1/16 weight 200
DellEMC(conf)#
Example (With
Weighted ECMP
Disabled)
DellEMC(conf)# ip route 1.1.1.0/24 6.6.6.2 weight 100
DellEMC(conf)# ip route 1.1.1.0/24 6.6.6.2 weight 200
DellEMC(conf)# do show ip route
Codes: C - connected, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last
Change
----------- ------- -----------
-----------
S 1.1.1.0/24 4.4.4.2, via Te 1/4 1/0 00:00:01
6.6.6.2, via Te 1/16
C 4.4.4.0/24 Direct, Te 1/4 0/0 00:01:32
C 6.6.6.0/24 Direct, Te 1/16 0/0 00:01:25
DellEMC(conf)#do show ip route 1.1.1.0/24
Routing entry for 1.1.1.0/24
Known via "static", distance 1, metric 0
Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via TenGigabitEthernet 1/4
* 6.6.6.2, via TenGigabitEthernet 1/16
DellEMC(conf)#
show ip route list
Display IP routes in an IP prefix list.
Syntax
show ip route [vrf vrf-name] list prefix-list
Parameters
prefix-list Enter the name of a configured prefix list.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to display IP routes in an
IP prefix list corresponding to that VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
IPv4 Routing 833