Administrator Guide

Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
remote-vtep-ip Enter the keyword remote-vtep-ip followed by the IP Address of the remote
VTEP.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON,
and Z9100–ON.
Example
DellEMC# show vxlan vxlan-instance 1 statistics remote-vtep-ip 1.1.1.1
Statistics for Remote-vtep-ip : 1.1.1.1
Unicast:
Rx Packets : 0
Rx Bytes : 0
Tx Packets : 0
Tx Bytes : 0
Non-Unicast:
Tx Packets : 0
Tx Bytes : 0
show vxlan vxlan-instance unicast-mac-local
Displays the information of the local unicast MAC associated with the logical network related to Network Virtualization Overlay
(NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID unicast-mac-local [logical—network
name | vnid VNID]
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
name (Optional) Enter the name of VXLAN logical network with a maximum length of 30
characters.
vnid VNID (Optional) Enter the keyword vnid and enter the ID of the VXLAN. The range is
from 1 to 16777215.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Updated to show VLT peer’s local macs.
9.11(0.0) Introduced the static mode on the S4048–ON, S4048T-ON, S6000–ON, S6010–
ON, S6100–ON, and Z9100–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
Virtual Extensible LAN (VXLAN) 1763