Administrator Guide

PFC Link Delay 45556 pause quanta
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
0 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts, 0 Pause Rx pkts
The following table describes the show interface pfc summary command fields.
Table 22. show interface pfc summary Command Description
Fields Description
Interface Interface type with stack-unit and port number.
Admin mode is on; Admin is enabled PFC Admin mode is on or off with a list of the configured PFC
priorities . When PFC admin mode is on, PFC advertisements are
enabled to be sent and received from peers; received PFC
configuration takes effect. The admin operational status for a DCBx
exchange of PFC configuration is enabled or disabled.
Remote is enabled; Priority list Remote Willing Status is enabled Operational status (enabled or disabled) of peer device for DCBx
exchange of PFC configuration with a list of the configured PFC
priorities. Willing status of peer device for DCBx exchange (Willing
bit received in PFC TLV): enabled or disabled.
Local is enabled DCBx operational status (enabled or disabled) with a list of the
configured PFC priorities
Operational status (local port) DCBx operational status (enabled or disabled) with a list of the
configured PFC priorities.
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were exchanged with
peer.
• Recommend: Remote PFC configuration parameters were
received from peer.
• Internally propagated: PFC configuration parameters were
received from configuration source.
PFC DCBx Oper status Operational status for exchange of PFC configuration on local port:
match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBx exchanges of PFC
parameters:
• Feature: for legacy DCBx versions
• Symmetric: for an IEEE version
TLV Tx Status Status of PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV: FCOE TLV Tx Status Status of FCoE advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Application Priority TLV: ISCSI TLV Tx Status Status of ISCSI advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Application Priority TLV: Local FCOE Priority Map Priority bitmap used by local DCBx port in FCoE advertisements in
application priority TLVs.
Application Priority TLV: Local ISCSI Priority Map Priority bitmap used by local DCBx port in ISCSI advertisements in
application priority TLVs.
Application Priority TLV: Remote FCOE Priority Map Status of FCoE advertisements in application priority TLVs from
remote peer port: enabled or disabled.
264 Data Center Bridging (DCB)