Administrator Guide

iSCSI Optimization
Internet small computer system interface (iSCSI) optimization enables quality-of-service (QoS) treatment for iSCSI storage traffic on Dell
EMC Networking OS platforms.
To configure and verify the iSCSI optimization feature, use the following Dell EMC Networking OS commands.
Topics:
• advertise dcbx-app-tlv
• iscsi aging time
• iscsi cos
• iscsi enable
• iscsi priority-bits
• iscsi profile-compellant
• iscsi target port
• show iscsi
• show iscsi session
• show iscsi session detailed
• show run iscsi
advertise dcbx-app-tlv
Configure DCBX to send iSCSI TLV advertisements.
Syntax
advertise dcbx-app-tlv iscsi
To disable DCBX iSCSI TLV advertisements, use the no advertise dcbx-app-tlv iscsi command.
Defaults Disabled.
Command Modes PROTOCOL LLDP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage Information You can configure iSCSI TLVs to send either globally or on a specified interface. The interface configuration takes
priority over global configuration.
iscsi aging time
Set the aging time for iSCSI sessions.
Syntax
iscsi aging time time
28
iSCSI Optimization 847