Administrator Guide

dot1p Value in
the Incoming
Frame
Description heading
0 1
1 0
2 2
3 3
4 4
5 5
6 6
7 7
• Before configuring the port queues to function as no-drop queues, you must first apply the dcb-map map with
pfc mode off. To apply the dcb-map with pfc mode off, use the following commands: dcb-map pfcoff and
no pfc mode on.
show dcb
Displays the data center bridging status, the number of PFC-enabled ports, and the number of PFC-enabled queues.
Syntax
show dcb
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Specify a stack-unit number on the Master switch in a stack.
Example
DellEMC# show dcb
stack-unit 1 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
DellEMC#
Data Center Bridging (DCB) 479