Administrator Guide

MIB Support for entAliasMappingTable
Dell EMC Networking provides a method to map the physical interface to its corresponding ifindex value. The
entAliasMappingTable table contains zero or more rows, representing the logical entity mapping and physical component to external
MIB identifiers. The following table lists the related MIB objects:
Table 118. MIB Objects for entAliasMappingTable
MIB Object OID Description
entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 Contains information about
entAliasMapping table.
entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 Contains information about a particular
logical entity.
entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 Contains a non–zero value and identifies the
logical entity named by the same value of
entLogicalIndex.
entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 Identifies a particular conceptual row
associated with the indicated
entPhysicalIndex and
entLogicalIndex pair.
Viewing the entAliasMappingTable MIB
• To view the entAliasMappingTable generated by the system, use the following command.
snmpwalk -v 2c -c public -On 10.16.150.97 1.3.6.1.2.1.47.1.3.2.1
.1.3.6.1.2.1.47.1.3.2.1.2.5.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097157
.1.3.6.1.2.1.47.1.3.2.1.2.9.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097669
.1.3.6.1.2.1.47.1.3.2.1.2.13.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098181
.1.3.6.1.2.1.47.1.3.2.1.2.17.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098693
.1.3.6.1.2.1.47.1.3.2.1.2.21.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099205
.1.3.6.1.2.1.47.1.3.2.1.2.25.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099717
.1.3.6.1.2.1.47.1.3.2.1.2.29.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100228
.1.3.6.1.2.1.47.1.3.2.1.2.30.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100356
.1.3.6.1.2.1.47.1.3.2.1.2.31.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100484
MIB Support for LAG
Dell EMC Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local interface) is to
designate the parameters and flags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending
node’s view of its peer parameters and flags. LACP provides a standardized means for exchanging information, with partner systems, to
form a link aggregation group (LAG). The following table lists the related MIB objects:
Table 119. MIB Objects for LAG
MIB Object OID Description
lagMIB 1.2.840.10006.300.43 Contains information about link aggregation
module for managing 802.3ad.
lagMIBObjects 1.2.840.10006.300.43.1
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters
and indexed by the ifIndex of the
Aggregator.
836 Simple Network Management Protocol (SNMP)