Administrator Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
The write memory command saves the running-configuration to the file labeled startup-configuration. When
using a LOCAL CONFIG FILE other than the startup-config not named “startup-configuration” (for example, you
used a specific file during the
boot config command), the running-config is not saved to that file; use the
copy command to save any running-configuration changes to that local file.
When you use the write memory command to copy the running configuration to the startup configuration file
with the startup configuration verification feature enabled, the system prompts you to update the hash for the
startup configuration using the verified boot hash command.
Control and Monitoring 161