Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048T-ON
1051105210531054105510561057105810591060
Figure 155. Create Logical Switch Port
NOTE: For more details about NVP controller conguration, refer to the NVP user guide from
VMWare .
Conguring VxLAN Gateway
To congure the VxLAN gateway on the switch, follow these steps:
1 Connecting to NVP controller
2 Advertising VXLAN access ports to controller
Connecting to an NVP Controller
To connect to an NVP controller, use the following commands.
1 feature vxlan
CONFIGURATION mode
feature vxlan
You must congure feature VXLAN to congure vxlan-instance.
2 vxlan-instance
CONFIGURATION mode
vxlan-instance instance ID
The platform supports only the instance ID 1 in the initial release.
3 controller
VxLAN INSTANCE mode
controller controller IDip address port port-number tcp|ptcp|pssl|ssl
The port number range is from 1 to 6632. The default port number is 6632. The default connection type is ssl.
4 gateway-ip
VxLAN INSTANCE mode
gateway-ip IP address
5 max-back o (Optional)
VxLAN INSTANCE mode
max_backo time
The range is from 1000-180000. The default value is 30000 milliseconds.
Virtual Extensible LAN (VXLAN)
1051