Users Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.9.1.0 Introduced VRF on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage Information
Use the vrf vrf-name attribute of this command to clear routes corresponding to
either a specific VRF or the default VRF.
You cannot use this attribute to clear routes corresponding to a management VRF.
Related
Commands
• ip route — assign an IP route to the switch.
• show ip route — view the routing table.
• show ip route summary — view a summary of the routing table.
clear tcp statistics
Clear TCP counters.
Syntax
clear tcp statistics [all | cp]
IPv4 Routing 974