Users Guide

esp Use the ESP protocol when you select the ESP transform set in
the crypto policy.
spi Enter the security parameter index number.
hex-key-string Enter the session key in hex format (a string of 8, 16, or 20
bytes). For DES algorithms, specify at least 16 bytes per key. For
SHA algorithms, specify at least 20 bytes per key.
encrypt Indicates the ESP encryption transform set key string.
auth Indicates the ESP authentication transform set key string.
Defaults None
Command Modes CONF-CRYPTO-POLICY
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
9.2(1.0) Introduced on the Z9500.
Usage Information
• This command is only available in the ipsec-manual model.
• The key information entry is associated with the global method for enabling clear
text or encrypted display in the running config.
show crypto ipsec transform-set
Display the transform set configuration.
Syntax
show crypto ipsec transform-set name
Parameters
name Enter the name of the transform set.
Command Modes EXEC
Internet Protocol Security (IPSec) 958