Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
9.2(1.0) Introduced on the Z9500.
Usage Information
• IPv4 addresses support only -/32 mask types.
• IPv6 addresses support only -/128 mask types.
• Configure match for bi-directional traffic for optimal routing.
• Only TCP is supported.
Example
match 0 tcp a::1 /128 0 a::2 /128 23
match 1 tcp a::1 /128 23 a::2 /128 0
match 2 tcp a::1 /128 0 a::2 /128 21
match 3 tcp a::1 /128 21 a::2 /128 0
match 4 tcp 1.1.1.1 /32 0 1.1.1.2 /32 23
match 5 tcp 1.1.1.1 /32 23 1.1.1.2 /32 0
match 6 tcp 1.1.1.1 /32 0 1.1.1.2 /32 21
match 7 tcp 1.1.1.1 /32 21 1.1.1.2 /32 0
session-key
Specify the session keys used in the crypto policy entry.
Syntax
session-key {inbound | outbound} {ah spi hex-key-string | esp spi
encrypt hex-key-string auth hex-key-string
To delete the session key information from the crypto policy, use the no session-
key {inbound | outbound} {ah | esp} command.
Parameters
name Enter the name for the transform set.
inbound Specify the inbound session key for IPSec.
outbound Specify the outbound session key for IPSec.
ah Use the AH protocol when you select the AH transform set in
the crypto policy.
Internet Protocol Security (IPSec) 957