Users Guide

Parameters
outgoing-port-
channel number
Enter the keywords outgoing-port-channel then the
number of the port channel to display flow information.
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
incoming-
interface interface
Enter the keywords incoming-interface then the interface
type and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
source-ip address Enter the keywords source-ip then the IP source address in IP
address format.
destination-ip
address
Enter the keywords destination-ip then the IP destination
address in IP address format.
source-port
number
Enter the keywords source-port then the source port number.
The range is from 1 to 65536. The default is None.
destination-port
number
Enter the keywords destination-port then the destination
port number. The range is from 1 to 65536. The default is None.
source-mac
address
Enter the keywords source-mac then the MAC source address
in the nn:nn:nn:nn:nn:nn format.
destination-mac
address
Enter the keywords destination-mac then the MAC
destination address in the nn:nn:nn:nn:nn:nn format.
vlan vlan-id Enter the keywords vlan then the VLAN-id. The range is from 0
to 4094.
ether-type Enter the keywords ether-type in the XX:XX format.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Interfaces 942