Users Guide

Version Description
9.9(0.0) Added support to display the interface configurations
corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series. Modified to display the LAG failover
group status.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information The following describes the show interfaces port-channel command shown in
the following example.
Field Description
Port-Channel 1... Displays the LAG’s status. In the Example, the status of the LAG’s
LAG fate-sharing group (“Failover-group”) is listed.
Hardware is... Displays the interface’s hardware information and its assigned
MAC address.
Port-channel is
part...
Indicates whether the LAG is part of a LAG fate-sharing group
(“Failover-group”).
Internet address... States whether an IP address is assigned to the interface. If an IP
address is assigned, that address is displayed.
MTU 1554... Displays link and IP MTU.
LineSpeed Displays the interface’s line speed. For a port channel interface,
it is the line speed of the interfaces in the port channel.
Members in this... Displays the interfaces belonging to this port channel.
ARP type:... Displays the ARP type and the ARP timeout value for the
interface.
Interfaces 939