Users Guide

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Example
Dell(conf-if-po-1)# show config
!
interface Port-channel 1
no ip address
shutdown
Dell(conf-if-po-1)#
show interfaces port-channel
Display information on configured Port Channel groups.
Syntax
show interfaces port-channel [channel-number] [brief]
[description]
Parameters
channel-number For a Port Channel interface, enter the keyword port-channel
then a number. The range is from 1 to 128.
NOTE: This command also enables you to view
information corresponding to a range of ports.
• For port-channel interfaces, you can specify
multiple ports as port-range. For example, if you
want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces port-channel 1 - 4.
brief (OPTIONAL) Enter the keyword brief to display only the port
channel number, the state of the port channel, and the number
of interfaces in the port channel.
description (OPTIONAL) Displays the port-channel information with
description.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
Interfaces 938