Users Guide

static
for the current static route configuration
status
for the file status information
support-
assist
for the current SupportAssist
configuration
tacacs+
for the current TACACS+ configuration
tftp
for the current TFTP configuration
trace-group
for the current trace-group
configuration
trace-list
for the current trace-list configuration
uplink-state-
group
for the uplink state group configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile
configuration
configured (OPTIONAL) Enter the keyword configuration to display line
card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum
for the running configuration and the start-up configuration.
compressed (Optional) Enter the keyword compressed to display the
compressed group configuration. Displays the compressed
configuration by grouping all similar configurations. The
compression is done only for interface related configurations.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
File Management 92