Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.9(0.0) Added support to display the interface configurations
corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.2.1.0 Added support for 4093 VLANs on E-Series.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Support added for hybrid port/native VLAN, introduced on the
S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information The following describes the show interfaces switchport command for the
following example.
Items Description
Name Displays the interface’s type, slot/port[/subport] number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”),
or hybrid (“Hybrid”), which supports both untagged and tagged
VLANs by the port.
Vlan membership Lists the VLANs to which the interface is a member. Starting with
Dell Networking OS version 7.6.1, this field can display native
VLAN membership by the port.
Example
Dell# show interfaces switchport
Name: TenGigabitEthernet 1/1
802.1QTagged: Hybrid
Vlan membership:
Vlan 2, Vlan 20
Native VlanId: 20
Interfaces 908