Users Guide

Time since last interface status change: 00:04:59
Dell#
Related
Commands
• show interfaces — display information on a specific physical interface or virtual
interface.
show interfaces dampening
Display interface dampening information.
Syntax
show interfaces dampening [[interface] [summary] [detail]]
Parameters
interface (Optional) Enter one of the following keywords and the interface
information:
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
NOTE: This command also enables you to view
information corresponding to a range of ports. However,
for Open Networking (ON) platforms the notation for
specifying port range in the command is different from
how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as
slot/port-range. For example, if you want to display
information corresponding to all ports between 1 and 4,
specify the port range as show interfaces
interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/
port/[subport] - slot/port/[subport]. For
example, if you want to display information corresponding
to all ports between 1 and 4, specify the port range as
show interfaces interface-type 1/1/1 - 1/1/4.
summary (OPTIONAL) Enter the keyword summary to display the current
summary of dampening data, including the number of interfaces
configured and the number of interfaces suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed
interface dampening data.
Defaults None
Command Modes EXEC
Interfaces 899