Users Guide

Te 1/17 Up 0 0 14950126 81293
Te 1/18 Up 0 0 0 0
Te 1/19 Down 0 0 0 0
Te 1/20 Up 62734 54 62766 18
Te 1/21 Up 60198 9 200899 9
Te 1/22 Up 17304741100 3157554 10102508511
1114221
Te 1/23 Up 17304769659 3139507 7133354895
523329
m - Change mode c - Clear screen
b - Display bytes r - Display pkts/bytes per sec
l - Page up a - Page down
mtu
Set the link maximum transmission unit (MTU) (frame size) for an Ethernet interface.
Syntax
mtu value
To return to the default MTU value, use the no mtu command.
Parameters
value Enter a maximum frame size in bytes. The range is from 592 to
9216.
Defaults 1554
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Reduced the maximum size of the maximum transmission unit
(MTU) to 9216 bytes on S6000, S6000-ON, S4048-ON, Z9500,
and C9010. Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Interfaces 884