Users Guide

interface range
This command permits configuration of a range of interfaces to which subsequent commands are applied
(bulk configuration). Using the interface range command, you can enter identical commands for a range
of interface.
Syntax
interface range interface {slot/port[subport] | port} — {slot/
port[subport] | port}, interface {slot/port[/subport] | port} —
{slot/port[/subport] | port},...
Parameters
interface {slot/
port[subport] |
port} — {slot/
port[subport] |
port}, interface
{slot/port[subport]
| port} — {slot/
port[subport] |
port},...
Enter interface range and one of the interfaces and then the
interface information. Select the range of interfaces for bulk
configuration. You can enter up to six comma-separated ranges.
Spaces are not required between the commas. The ranges can
include VLANs, port-channels, and physical interfaces.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
• For a Tunnel interface, enter the keyword Tunnel then a
number from 1 to 16383.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P2) Introduced on the S4038-ON.
9.8(0.0P5) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Interfaces 870