Users Guide

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.4.1.0 Introduced

Usage Information You cannot delete the Null interface. The only configuration command possible in a

Null interface is ip unreachables.

Example

Dell(conf)# interface null 0

Dell(conf-if-nu-0)#

Commands

• interface — configure a physical interface.

• interface loopback — configure a Loopback interface.

• interface port-channel — configure a port channel.

• interface vlan — configure a VLAN.

• ip unreachables — enable generation of internet control message protocol (ICMP)

unreachable messages.

Interfaces 869