Users Guide

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a tunnel interface, enter the keyword tunnel. The
range is from 1 to 16383.
NOTE: This command also enables you to clear the port
configurations corresponding to a range of ports.
However, for Open Networking (ON) platforms the
notation for specifying port range in the command is
different from how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as
slot/port-range. For example, if you want to clear the
port configurations corresponding to all ports between 1
and 4, specify the port range as
show interfaces
interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/
port/[subport] - slot/port/[subport]
. For
example, if you want to clear the port configurations
corresponding to all ports between 1 and 4, specify the
port range as show interfaces interface-type
1/1/1 - 1/1/4.
vrrp [ipv6 {vr-id} |
vr-id]
(OPTIONAL) Enter the keyword vrrp to clear the counters of all
VRRP groups. To clear the counters of VRRP groups on all IPv6
interfaces, enter ipv6. To clear the counters of a specified
group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC learning
limit is configured on the interface.
vlan vlan-id Enter the keyword vlan followed by the interface VLAN
number. The range is from 1 to 4094.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.9(0.0) Added support to clear the interface configurations
corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
Interfaces 852